Stock shape of PEEK for fine machining with high modulus

Heat resistanceWear resistanceLow dielectric constant

 Compression molding 

SCM5200 (Rigid PEEK) is a stock shape of PEEK for fine machining with high modulus made by compression molding: PBI Method.

Characteristics of SCM5200

Possible finer machining
Easy to deburr after machining

Dielectric constant:
Low dielectric constant: 3.6 (23°C, 1 MHz)

Thermal property:

Wear resistance:
Excellent wear resistance

Typical properties of SCM5200

Item Condition Standard Unit Property
Tensile strength 23°C ISO 527 MPa 80
Tensile strain at break
23°C ISO 527 % 1.2
Flexural strength 23°C ISO 178 MPa 120
Flexural modulus 23°C ISO 178 GPa 9.5
Charpy notched impact strength
23°C ISO 179 kJ m-2 1.2
Coefficient of linear thermal expansion < Tg JIS K7197 ppm °C-1 33
Surface resistance 23°C ANSI/ESD STM11.13 Ω
> 1013
Water absorption 23°C, 24 hr ISO 62 % 0.09

These values are not to be construed as specifications.


Lineup of SCM5200

Please contact sales representative or inquiry form for details.