PBI Advanced Materials supplies such products as stock shapes, machining parts, and compounds of PBI. Download technical information of our PBI products from the link in the bottom of this page! * Please register your information before the downloading! Compression Molding Grade | Injection Molding Grade | Coatings

Compression Molding Grade • Grade List Product Grade Filler Performance Mechanical property High heat resistance Electrical property Plasma resistance Chemical resistance Tribological property SCM7000 Standard       SCM7000HP Low Outgas, High Purity       SCM7500 ESD VGCF(*1)   SCM7600 Carbon Fiber Reinforced CF(*2) *1. Vapor Growth Carbon Fiber *2. Carbon Fiber • Molding Method • Properties   Test Method Condition Unit SCM7000 SCM7000HP SCM7500 SCM7600 Tensile Strength JIS K7113 23°C MPa 160 138 156 Flexural Strength JIS K7171 23°C MPa 220 193 249 Izod Impact Strength - Notched ASTM D256 23°C J/m 28 - 47 Rockwell Hardness ASTM D785 23°C A scale 50 50 55 Coefficient of Thermal Expansion JIS K7197 24-150°C K-1 2.3 x 10-5 - 2.8 x 10-5 Heat Deflection Temperature ASTM D648 1.8 MPa °C 410 410 410 Thermal Conductivity ASTM F433 24°C W/(m･K) 0.41 0.41 0.38 Volume Resistivity ASTM D257 23°C ohm･cm 2.0 x 1015 1.0 x 106 1.4 x 100 KYUSUIRITSU ASTM D570 23h,23°C % 0.40 - - Density JIS K7112A 23°C - 1.3 1.3 1.3 These data are not for specifications * Volume Resistivity of SCM7600 was tested by JIS K7194 |Top of Page|

Injection Molding Grade • Grade List Product Grade Filler Performance Mechanical property High heat resistance Electrical property Plasma resistance Chemical resistance Tribological property TU-60 Standard           TF-60V Low Outgas, High Purity CF(*3)       TF-60C ESD CF(*2)     TL-60 Carbon Fiber Reinforced CF(*2) BN(*4) GR(*5)     *2. Carbon Fiber *3. Glass Fiber *4. Boron Nitride *5. Graphite • Molding Method • Properties   Test Method Condition Unit TU-60 TF-60V TF-60C TL-60※ Tensile Strength JIS K7113 23°C MPa 120 170 220 120 Flexural Strength JIS K7171 23°C MPa 140 210 310 160 Izod Impact Strength - Notched ASTM D256 23°C J/m 36 36 37 - Rockwell Hardness ASTM D785 23°C A scale 25 30 30 24 Coefficient of Thermal Expansion JIS K7197 24-150°C K-1 3.4 x 10-5 1.7 x 10-5 2.6 x 10-5 1.1 x 10-5 Heat Deflection Temperature ASTM D648 1.8 MPa °C 250 310 320 310 Thermal Conductivity ASTM F433 24°C W/(m･K) - 0.36 0.45 0.78 Volume Resistivity ASTM D257 23°C ohm･cm 2.0 x 1014 1.0 x 1014 4.0 x 104 - KYUSUIRITSU ASTM D570 23h,23°C % 0.30 0.25 0.15 0.20 Density JIS K7112A 23°C - 1.3 1.5 1.4 1.4 These data are not for specifications * TL-60 is s make-to-order product. |Top of Page|

Coatings • Grade List Product Grade Filler Performance Mechanical property High heat resistance Electrical property Plasma resistance Chemical resistance Tribological property MRS0810H Solution     WRD0525H Water Based Dispersion     • Coating Method • Properties   Test Method Condition Unit MRS0810H Tensile Strength JIS K7127 23°C 20μm thickness MPa 100 Tensile Modulus JIS K7127 23°C 20μm thickness GPa 3 Tensile Elongation JIS K7127 23°C 20μm thickness % 10 Scratch Hardness (Pencil Method) JIS K5600-5-4 300°C Heat-treated - > 7H Adherability (Cross-cut Method) JIS K5600-5-6 23°C Dot 10 These data are not for specifications |Top of Page|